The Talking Machine Forum — For All Antique Phonographs & Recordings

I am looking for either a complete HMV 101 motor or the following parts that were mentioned in this thread (minus the motor cover): http://forum.talkingmachine.info/viewto ... 11&t=31930.
So specifically:
-Worm Gear/ Handle Screw
-Matching Circlip
-Non return spring
Also I'm located in the U.S.
-Tom

Tom- That was easy... check your PMs!

It turns out that my model of motor is the No. 59, the one that I got from George goes to the motors on the earlier 101's. As such, it's a bit too big. Let me know if you have the parts listed ubove for a HMV model No. 59 motor or a complete motor.
-Tom

I thought that I might try to bring this back up again.
My motor is the ones that’s listed here: http://www.graham-ophones.co.uk/motors- ... 4587112801
Here’s a picture showing sort of what I’m specifically looking for: However, if you have the entire motor I’d also be interested as well
-Tom

I have a HMV 101 I am planning to part out-just too far gone. Will parts from this motor help you?

Thanks,

Matt

Edit: Upon close inspection, probably not, but if there are parts you can use, please let me know.

No, that’s actually exactly what I need! My motor actually has all of the other parts Send me a PM on how much you’d like to get for it.
-Tom Pappas

It is good that you are making progress. Keep us informed and post photos when possible.
Don

PM sent.