Columbia Viva-Tonal Reproducer Rebuild
Posted: Mon Oct 30, 2017 10:19 am
I recently acquired a little model 602? Columbia Viva-Tonal victrola which has the somewhat exotic reproducer that was meant to compete with Victor's Orthophonic machine. It appeared totally beyond my ability to rebuild and I heard about a fellow named Wyatt that could rebuild them. His email is: [email protected].
I heard about Wyatt from a friend who has been in the Victrola business for a long, long time so I took a chance and sent him my Viva-Tonal reproducer. The exterior looked pretty nice, but I could see the insulating gasket was as hard as a rock and thought the rest of it would probably be equally stiff.
The reproducer was turned around in a matter of about 5 days and what came back to me was quite the most amazing transformation. Everything was polished and the reproducer has absolutely staggering fidelity! I am sure this is owing to the care in rebuilding. Wyatt replaced the bearings and created an injection molded gasket among other things. My original aluminum disk was ok. He obviously worked wonders and I could not be more pleased.
I have owned a number of Victor Orthophonic machines over the years and I can tell you with great conviction that the Viva-Tonal IS TRULY the equal and better of the Orthophonic reproducer. It's not a myth. Both are excellent and there is no doubt there. You cannot go wrong with either one. However, in my opinion, the Viva-Tonal is more discriminating in presenting the full range of frequencies. You hear more little details in the presentation of the music than you do with the Orthophonic. I guess the word "clarity" would be word I would use to describe the primary advantage the Viva-Tonal has over the Orthophonic. From the highest to the lowest frequency you can throw at it, the Viva-Tonal performs like a champ and does not miss a beat.
I had never heard of Wyatt in my life but I have no hesitation now in recommending his work to anyone that has a Columbia Viva-Tonal reproducer. I just don't think you will find better workmanship on a rebuild anywhere.
Stuart McCaskill - [email protected]
I heard about Wyatt from a friend who has been in the Victrola business for a long, long time so I took a chance and sent him my Viva-Tonal reproducer. The exterior looked pretty nice, but I could see the insulating gasket was as hard as a rock and thought the rest of it would probably be equally stiff.
The reproducer was turned around in a matter of about 5 days and what came back to me was quite the most amazing transformation. Everything was polished and the reproducer has absolutely staggering fidelity! I am sure this is owing to the care in rebuilding. Wyatt replaced the bearings and created an injection molded gasket among other things. My original aluminum disk was ok. He obviously worked wonders and I could not be more pleased.
I have owned a number of Victor Orthophonic machines over the years and I can tell you with great conviction that the Viva-Tonal IS TRULY the equal and better of the Orthophonic reproducer. It's not a myth. Both are excellent and there is no doubt there. You cannot go wrong with either one. However, in my opinion, the Viva-Tonal is more discriminating in presenting the full range of frequencies. You hear more little details in the presentation of the music than you do with the Orthophonic. I guess the word "clarity" would be word I would use to describe the primary advantage the Viva-Tonal has over the Orthophonic. From the highest to the lowest frequency you can throw at it, the Viva-Tonal performs like a champ and does not miss a beat.
I had never heard of Wyatt in my life but I have no hesitation now in recommending his work to anyone that has a Columbia Viva-Tonal reproducer. I just don't think you will find better workmanship on a rebuild anywhere.
Stuart McCaskill - [email protected]