Page 1 of 1
Victrola Granada in Westhaven, CT
Posted: Sun Feb 25, 2018 3:39 pm
by OldRestorer
Re: Victrola Granada in Westhaven, CT
Posted: Sun Feb 25, 2018 4:53 pm
by melvind
Not a Granada that tag is just sitting in there.
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 12:56 pm
by EdiBrunsVic
Perhaps it is a Colony model.
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 1:28 pm
by brianu
EdiBrunsVic wrote:Perhaps it is a Colony model.
That’s a 4-7 aka consolette... the colony is much wider and a bit less common.
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 2:30 pm
by Viva-voce
brianu wrote:EdiBrunsVic wrote:Perhaps it is a Colony model.
That’s a 4-7 aka consolette... the colony is much wider and a bit less common.
Yup--most definitely a consolette
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 2:37 pm
by OrthoFan
EdiBrunsVic wrote:Perhaps it is a Colony model.
For handy reference, here's the direct link to the list describing and illustrating (most of) the models produced by the Victor Talking Machine Co. --
http://www.victor-victrola.com/new_page_2.htm
(Main Page --
http://www.victor-victrola.com/ )
OrthoFan
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 3:29 pm
by 52089
Viva-voce wrote:brianu wrote:EdiBrunsVic wrote:Perhaps it is a Colony model.
That’s a 4-7 aka consolette... the colony is much wider and a bit less common.
Yup--most definitely a consolette
Not to be picky, but the Consolette became the 4-3, not the 4-7. The machine pictured is a 4-7. The Consolette/4-3 is a bit smaller.
http://www.victor-victrola.com/4-7.htm
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 3:52 pm
by Dedrums
Two consolettes vv4-3. The tone arm is connected in the center.
Re: Victrola Granada in Westhaven, CT
Posted: Mon Feb 26, 2018 3:57 pm
by Viva-voce
Ah yes a 4-7.
Thanks for the clarification--I get these two smaller models mixed up.
But I knew for sure it isn't a Granada lol
Steven