Featured Phonograph № 142 - Columbia BI Sterling
Posted: Sun Dec 02, 2018 1:36 pm
Make: Columbia
Model: BI Sterling
Serial #: No serial number
Year(s) Made: 1905-1909
Original Cost: $45.00
Case/Cabinet Size: 13" x 13" x 8" tall
Turntable: 10"
Reproducer: Analyzing
Motor: Triple spring
Horn Dimensions: 20.75" by 17" deep
Reproduction Parts: Turntable felt and main springs
Current Value: ????
Interesting Facts: I bought the machine cheap and only expected to salvage the horn for my BII. I decided to clean the machine up without restoring it. It displays and plays well. A nice feature of this model is the volume control on the tone arm. The reproducer has been rebuilt and the motor has been cleaned, adjusted, lubricated and received new springs. The flash is not very flattering. The machine looks nicer in person.
The last group of pictures are as received. The first set is from today, (sorry for the dust). The horn had paint spatter, missing veneer and the rivets had been replaced with sheet metal screws. The rivets were easy to reproduce, but the riveting tools were a little more involved. The machine is not museum quality or really even fully restored, but it is in decent, refurbished condition.
Please excuse the succession of Featured Phonographs. I tend to do things in spurts and strike when the inspiration hits, (otherwise I would tend to put things off). Hopefully that ends in 21 months when I retire and my schedule allows for less regimentation.
Model: BI Sterling
Serial #: No serial number
Year(s) Made: 1905-1909
Original Cost: $45.00
Case/Cabinet Size: 13" x 13" x 8" tall
Turntable: 10"
Reproducer: Analyzing
Motor: Triple spring
Horn Dimensions: 20.75" by 17" deep
Reproduction Parts: Turntable felt and main springs
Current Value: ????
Interesting Facts: I bought the machine cheap and only expected to salvage the horn for my BII. I decided to clean the machine up without restoring it. It displays and plays well. A nice feature of this model is the volume control on the tone arm. The reproducer has been rebuilt and the motor has been cleaned, adjusted, lubricated and received new springs. The flash is not very flattering. The machine looks nicer in person.
The last group of pictures are as received. The first set is from today, (sorry for the dust). The horn had paint spatter, missing veneer and the rivets had been replaced with sheet metal screws. The rivets were easy to reproduce, but the riveting tools were a little more involved. The machine is not museum quality or really even fully restored, but it is in decent, refurbished condition.
Please excuse the succession of Featured Phonographs. I tend to do things in spurts and strike when the inspiration hits, (otherwise I would tend to put things off). Hopefully that ends in 21 months when I retire and my schedule allows for less regimentation.