Page 1 of 1
WANTED: Crank for Brunswick Sharon
Posted: Sat Jan 05, 2019 5:09 pm
by eighteenbelow
I'm looking for a crank for my Brunswick Sharon phonograph. I'm not sure if it's male or female, but I believe the reach is maybe 7.5" or 8". If you have one, please let me know; and if you have a Sharon and can tell me for sure whether it's male or female and what its reach and throw are, I would be grateful. Thanks!
Re: WANTED: Crank for Brunswick Sharon
Posted: Sun Jan 06, 2019 1:01 am
by Jerry B.
PM sent. Jerry Blais
Re: WANTED: Crank for Brunswick Sharon
Posted: Tue Jan 08, 2019 6:12 pm
by eighteenbelow
Someone has very kindly posted photos of what the crank should look like. If anyone thinks they have one, please let me know. I've also attached a couple of photos of the crank receptacle on my motor. Thanks!
Re: WANTED: Crank for Brunswick Sharon
Posted: Tue Jan 08, 2019 6:33 pm
by Herman
eighteenbelow wrote:Someone has very kindly posted photos of what the crank should look like. If anyone thinks they have one, please let me know. I've also attached a couple of photos of the crank receptacle on my motor. Thanks!
Picture added of the longer crank.
I found 2 cranks that matched your description. One is the same length of the shaft of 6".
The other is 1 inch shorter.
I will post pictures shortly
Herman