Page 1 of 1
How Long Is The Crank For A VV-405?
Posted: Mon Jan 14, 2019 7:33 pm
by Dave D
I am repairing a VV-405 and only have the motor. The crank the owner sent is a cobble job and I would like to find a proper crank for this gentleman. The problem is, i have no idea how long it should be. Does anyone have this model and could offer some information?
Thanks!
Dave D
Re: How Long Is The Crank For A VV-405?
Posted: Mon Jan 14, 2019 7:45 pm
by EarlH
On my VV-410 it's just short of 5 ¾" to where the crank bends. I'm pretty sure all the cranks are the same on that series of machines. Good luck with it now, Earl.
Re: How Long Is The Crank For A VV-405?
Posted: Mon Jan 14, 2019 7:51 pm
by Dave D
Thank you so much!
Dave
Re: How Long Is The Crank For A VV-405?
Posted: Mon Jan 14, 2019 8:32 pm
by Skihawx
I am pretty sure one of these is from a VV-405. I know I have other parts from a 405. Both appear to be about the same length. The nicer one is $35 and the rougher one is $25 plus actual shipping.