The Talking Machine Forum — For All Antique Phonographs & Recordings

Well I searched the net and our group but did not have any luck finding my issue. I have a VV 8-4 with a lid that will not stay open. These are the spring lid supports. And help would be appreciated. I already tightened all the screws.

The lid on my 8-4 has this issue too. Sometimes I can get the lid to stay open after a few tries.

See if this service bulletin helps.

Terry

85corvetteman wrote:See if this service bulletin helps.

Terry

Huge help!! Thanks. Will try this in the morning!!

85corvetteman wrote:See if this service bulletin helps.

Terry

Thanks Terry!! Step 1 worked like a charm!!

Great !!! Glad it helped. I used that service bulletin to adjust the closure on my VV 8-4 and VV 4-3.

Take care,
Terry

Gents, I’m glad you found the Victor service instructions useful! Victor published many such pamphlets to aid the dealer.

Here is my original posting, the images are a bit clearer.

http://forum.talkingmachine.info/viewto ... ds#p202866


Mark

Thanks Mark !!
I knew my screen captures came from the TMF due to the heading on one of my screen captures.
Wasn’t trying to take credit for your parade, just had them on my iPad for easy access without having to do an archive search on the TMF.

Thanks for the helpful info.
Terry

Hi Terry,

No apologies needed, just happy that folks found the info useful.

Mark