The Talking Machine Forum — For All Antique Phonographs & Recordings

I have a suitcase panatrope phonograph model 106 and I need a crank for it .
The crank is threaded and it goes in about 4 ½ inches from the outside
edge of the cabinet.
The thread size for the crank is 24 threads per inch.
The shaft size is ¼ inch. The threads go up approximately
¾ of an inch on the shaft.

Any help is appreciated

Found this in parts pile. 5/16 (.312) shaft. It has ¼-28 threads. See pics. If you can use it, let me know.

Checking!
Thank you!

Kirk

Sorry it wont work. the threads are not correct.
Thank you so much for trying.
Kirk

Looking...