The Talking Machine Forum — For All Antique Phonographs & Recordings

This is a highly sought after original 13" horn used on various coin operated Graphophones. This one has been straightened by John Duffy and re-plated using a dull/satin finish nickel. It is a beautiful example. It fits on an original elbow. I will accept checks or money orders only unless we discuss PayPal prior to the sale. Safe shipping will be at actual cost or I can deliver to Union. Any questions or commit to buy please PM me. Thanks, Joe

Price cut $100. Now $750
Joe

Very nice horn..Educate me a little. The narrow end looks tapered without a typical nipple end. Has this been cut off or did the coin-op horns have this type of end?

Thanks for the info ...Beautiful horn..

Joe

Here is a pic of my BS Horn... there is no nipple in view but actually, inside the tapered end, the horn is beefed up with a 1 inch nipple inserted and soldered inside the end.. I believe it is all original..

The horn slides over the small horn elbow which I have also attached a picture of..

disregard the shadow of the small end of the horn on the wall from the flash...

Blizz

Blizz, thanks for posting pics and clarification. I can post some pics tomorrow of the inner sleeve. Yes, I believe it to be all correct.
Joe

Priced at $700 now. I have attached a closeup of the inner sleeve mentioned above. If you look at where the seam is on the outside the inside is covered by the sleeve.
Thanks, Joe