Page 1 of 1
Victrola VV 8-9 carved appliques
Posted: Mon Aug 26, 2019 3:57 pm
by Bruce_Van_Note
As many of you know, I've just acquired a Victrola VV 8-9. I need to replace the carved wood appliques on the front of the cabinet. Does anyone have these pieces for sale, or could recommend a place where I could find them? I've asked APSCO and they don't have them. Thanks.
Re: Victrola VV 8-9 carved appliques
Posted: Mon Aug 26, 2019 4:29 pm
by 52089
You're not likely to find them. I'd suggest you create a mold of your existing one and use it to fill in the missing pieces. There are instructions for this in Compleat Talking Machine and on the board.
Re: Victrola VV 8-9 carved appliques
Posted: Mon Aug 26, 2019 4:45 pm
by zenith82
52089 wrote:You're not likely to find them. I'd suggest you create a mold of your existing one and use it to fill in the missing pieces. There are instructions for this in Compleat Talking Machine and on the board.
+1
The center one that's missing a piece is symmetrical.
Re: Victrola VV 8-9 carved appliques
Posted: Tue Aug 27, 2019 11:55 pm
by marcapra
I am the seller of the 8-9 to Bruce, and I have that piece which I took off of my other 8-9. I am planning to make a mold and send Bruce the molding for his. Like so many things in life, I just haven't got around to it yet. I have the materials, just have to get out there and do it. Marc.