Page 1 of 1
WANTED: Junker VTLA/ L-Door
Posted: Mon Sep 23, 2019 8:07 pm
by long_island_phono
I am in need of a donor VTLA/ L-door machine for a restoration project. Crank and reproducer not needed but will take a look at everything else!
-Jake
Re: WANTED: Junker VTLA/ L-Door
Posted: Mon Sep 23, 2019 8:29 pm
by 52089
I don't know where you are, but this one is in Massachusetts:
http://forum.talkingmachine.info/viewto ... 14&t=42063
Re: WANTED: Junker VTLA/ L-Door
Posted: Mon Sep 23, 2019 10:34 pm
by downsouth
Check your PM and email, Wes
Re: WANTED: Junker VTLA/ L-Door
Posted: Mon Sep 23, 2019 11:49 pm
by mattrx
Not sure if it will help, but I have a mahogany lid for an L-Door XVI that needs a little veneer work (bubbling in one spot). Yours for shipping if you can use it.
Matt
Re: WANTED: Junker VTLA/ L-Door
Posted: Tue Sep 24, 2019 11:16 am
by long_island_phono
mattrx wrote:Not sure if it will help, but I have a mahogany lid for an L-Door XVI that needs a little veneer work (bubbling in one spot). Yours for shipping if you can use it.
Matt
Hi Matt,
Thanks for the offer however I am ok ( for the most part) cabinet wise and do not need a lid.
-Jake
Re: WANTED: Junker VTLA/ L-Door
Posted: Tue Sep 24, 2019 11:49 am
by studebakerphonos
What exactly do you need? What is your S/N . Thanks, Bob
Re: WANTED: Junker VTLA/ L-Door
Posted: Tue Sep 24, 2019 10:19 pm
by long_island_phono
studebakerphonos wrote:What exactly do you need? What is your S/N . Thanks, Bob
Hi Bob. Thanks to another forum member I should be ok at the moment. I am rethinking my plans regarding this process but will post again if I decide I need more parts.