Need a Motor and Crank for a Sinora Grand
Posted: Sun Sep 29, 2019 5:49 pm
I've never used a forum before so please forgive me if this is in the wrong format, The missing motor would be square approximately 7x8 inches and mount to the floor of the cabinet rather than to the bottom of the motor board The mounting holes would be according to the mounting points I have on the case 7 ½ horizontally and 6 inches from center to center of the screw holes vertically It's the only one that would appear to be upside down It belonged to my grandmother I'd like to get it to play one more time for her
Thank You
Warren
Here is some additional information Mr. Paul was geacious enough to provide
Hello Warren,
Ah - - I know that motor! It's still a Paillard, but it sits up on 4 legs. Unfortunately, I don't have that motor to shoot for you. I see that you're on the Talking Machine Forum. If you ask there, perhaps a forum member can help.
Best of luck,
George Paul - Antique Phonograph Society
Thank You
Warren
Here is some additional information Mr. Paul was geacious enough to provide
Hello Warren,
Ah - - I know that motor! It's still a Paillard, but it sits up on 4 legs. Unfortunately, I don't have that motor to shoot for you. I see that you're on the Talking Machine Forum. If you ask there, perhaps a forum member can help.
Best of luck,
George Paul - Antique Phonograph Society