WANTED: Victor X Motor
Posted: Sat Dec 14, 2019 11:59 pm
I need a good Victor X Motor. Tampa Bay area.
I think you're asking for a Victrola X motor. Correct? If so, the VV-X started as a very early table model. I believe even the early table model had two different versions of the Victor III motor. The Victrola X continued as the smallest floor model and went through several variations for many years. So there are quite a few motors that are correct for any particular version of the VV-X and they are generally not interchangeable.
If your machine has part of a motor, please post a photo. If you are without a motor please post photos of the motor board area as well as the crank side of the cabinet. Information from the ID tag would also be helpful.
The Victor Data Book and Look For The Dog are really good reference books.
Jerry Blais