Page 1 of 1
HMV His Masters Voice HMV 34 motor from HMV 193/194 203/204
Posted: Wed Mar 04, 2020 2:03 pm
by soundgen
HMV His Masters Voice HMV 34 motor from HMV 193/194 203/204 cabinets etc RARE
“As found motor clicks when wound so has 1 broken spring and needs cleaning and overhauling , see pictures”
https://www.ebay.co.uk/itm/233514657915
Re: HMV His Masters Voice HMV 34 motor from HMV 193/194 203/
Posted: Wed Mar 04, 2020 3:18 pm
by gramophone-georg
Say, is that shorter 8" arm you have up acceptable for an HMV No. 32 machine?
Re: HMV His Masters Voice HMV 34 motor from HMV 193/194 203/
Posted: Thu Mar 05, 2020 5:45 am
by slippery
Does this have the longer spindle required for the thicker seatboards on the big re-entrants?
Re: HMV His Masters Voice HMV 34 motor from HMV 193/194 203/
Posted: Fri Mar 06, 2020 1:27 pm
by soundgen
gramophone-georg wrote:Say, is that shorter 8" arm you have up acceptable for an HMV No. 32 machine?
possibly I'll have to try and find out
Re: HMV His Masters Voice HMV 34 motor from HMV 193/194 203/
Posted: Fri Mar 06, 2020 1:29 pm
by soundgen
slippery wrote:Does this have the longer spindle required for the thicker seatboards on the big re-entrants?
Not sure I'll measure it , didn't really think about that do you know what the difference is ?
Re: HMV His Masters Voice HMV 34 motor from HMV 193/194 203/
Posted: Fri Mar 06, 2020 7:31 pm
by slippery
The correct spindle for a 202/203 should protrude 48mm above the frame casting, on the majority of 34 motors it will be around 44mm...apart from the spindle everything else is the same. (I'm not sure about on the 193/194's though)