The Repair Shop on Netflix
Posted: Wed Mar 11, 2020 8:58 pm
Has anyone else seen this British show? They worked on a Peter Pan and an Edison Gem
Dave D
Dave D
https://forum.talkingmachine.info/
Yes, the Edison Opera is one they got spectacularly wrong. Not only was the horn stripped and refinished so that it no longer matched the case, the two parts were glued together with no attempt made to reproduce the metal fittings. The machine sounded just as bad after it had been "repaired" as it had done before. It was running far too fast, and the wobble was more than just an out of round cylinder. To those with long memories, the tenor Ernest Pike sounded more like one of the Chipmunks.kirtley2012 wrote:There's another where Tim worked on an opera too
Yes I must say I'd forgotten what they did to it but remember I did somewhat cringe, nice to see such a rare machine featured on tv, shame to see what they did to it.epigramophone wrote:Yes, the Edison Opera is one they got spectacularly wrong. Not only was the horn stripped and refinished so that it no longer matched the case, the two parts were glued together with no attempt made to reproduce the metal fittings. The machine sounded just as bad after it had been "repaired" as it had done before. It was running far too fast, and the wobble was more than just an out of round cylinder. To those with long memories, the tenor Ernest Pike sounded more like one of the Chipmunks.kirtley2012 wrote:There's another where Tim worked on an opera too
I never met the late Gilbert Fury, the previous owner of the Opera, but I could imagine him looking down in horror.
This episode was below The Repair Shop's usual very high standard. I speak from experience, as my wife and I took part in the second series when our Georgian desk was was most beautifully and sympathetically restored by Will Kirk. It remains the oldest item ever to be featured on the programme.
Tim had to ask a clock repairer how the Gem worked !kirtley2012 wrote:Yes I must say I'd forgotten what they did to it but remember I did somewhat cringe, nice to see such a rare machine featured on tv, shame to see what they did to it.epigramophone wrote:Yes, the Edison Opera is one they got spectacularly wrong. Not only was the horn stripped and refinished so that it no longer matched the case, the two parts were glued together with no attempt made to reproduce the metal fittings. The machine sounded just as bad after it had been "repaired" as it had done before. It was running far too fast, and the wobble was more than just an out of round cylinder. To those with long memories, the tenor Ernest Pike sounded more like one of the Chipmunks.kirtley2012 wrote:There's another where Tim worked on an opera too
I never met the late Gilbert Fury, the previous owner of the Opera, but I could imagine him looking down in horror.
This episode was below The Repair Shop's usual very high standard. I speak from experience, as my wife and I took part in the second series when our Georgian desk was was most beautifully and sympathetically restored by Will Kirk. It remains the oldest item ever to be featured on the programme.
Must say I'm not a fan of refinishing unless theres virtually no finish left at all, but that opera, I seem to remember looking quite respectable before, certainly not needing a refinish.
That's a gorgeous desk there, wonderful veneers