For Sale: Hard to Find Reproducers; Horn Elbows - All Sold
Posted: Wed May 13, 2020 3:08 pm
The quarantine has given me a chance to go through my bits and pieces so that I can offer some hard to find things up to the members of the forum. The Items that I am offering up for sale are the following:
PLEASE RESPOND TO MY EMAIL: [email protected]
Ken Danckaert
1.Talk-O-Phone horn elbow with screw in insert (Great condition, no cracks ) --- $55 - Sold
2. Victor Improved Concert Reproducer. (Great condition, rebuilt, sounds great) -- $160 - Sold
3. Victor long throat Exhibition Jr. All original. Very hard to find. These were originally on the Victor Z and Victor R but will play on any machine needing a long throat reproducer. (Rebuilt and plays great.) --- $325 _ Sold
4. Victor long throat Exhibition reproducer. Looks to have a Bronze oxide finish. For a Victor R? Comes with wood Exhibition box made for this reproducer. It has the lid with almost all of the printing. ⅝” of the lid was missing and it has been replaced. The board inside the case that holds the reproducer has also been replaced. It has the proper holes in it for the reproducer. The latch for the lid is there and works properly. (Rebuilt and plays great.) ---$225 - Sold
5. Victor long throat Exhibition reproducer. Excellent condition. This has a modified back plate the make a long throat reproducer from a standard Exhibition reproducer. (rebuilt.) $135 - Sold
6. Victor I horn elbow. No dents, excellent nickel plating. (Original) --- $145 SOLD
7. Crane supports for a cylinder machine. These screw on the back of the case. Nickel plating. In excellent condition. -- $15 SOLD
8. Victor Exhibition Junior. Very rare and desirable. Excellent condition and has been rebuilt and polished. I should point out that the Exhibition Jr reproducers were nickel plated. Many, but not all, the plating has turned black. Most, if polished will see the nickel shine come out. There are a number of them out there that still have good nickel plating. Will fit on any standard Victor tonearm. Excellent condition. Also used on some Zonophone machines. --- $ 300 - Sold
9. Victor “Y” bracket that attaches to the top of the back mount bracket to hold the horn In place. This fits the larger bracket like used on the Victor IV, V, and VI. ---- $30
10. Columbia Reproducer box. Excellent condition. Has some writing on the outside of the box. Very clear stamping on the top saying “REPRODUCER”. --- $30 SOLD
11. Victor Junior Exhibition reproducer. Early pot metal version. Not rebuilt or otherwise touched. Low serial number 950. Round needle hole. Not rebuild but ready to be refurbished. --- $300 - Sold
12. Columbia long throat reproducer. Like new, not a reproduction. Rebuilt. Fully stamped under mica with Columbia information. --- $140 SOLD
PLEASE RESPOND TO MY EMAIL: [email protected]
Ken Danckaert
1.Talk-O-Phone horn elbow with screw in insert (Great condition, no cracks ) --- $55 - Sold
2. Victor Improved Concert Reproducer. (Great condition, rebuilt, sounds great) -- $160 - Sold
3. Victor long throat Exhibition Jr. All original. Very hard to find. These were originally on the Victor Z and Victor R but will play on any machine needing a long throat reproducer. (Rebuilt and plays great.) --- $325 _ Sold
4. Victor long throat Exhibition reproducer. Looks to have a Bronze oxide finish. For a Victor R? Comes with wood Exhibition box made for this reproducer. It has the lid with almost all of the printing. ⅝” of the lid was missing and it has been replaced. The board inside the case that holds the reproducer has also been replaced. It has the proper holes in it for the reproducer. The latch for the lid is there and works properly. (Rebuilt and plays great.) ---$225 - Sold
5. Victor long throat Exhibition reproducer. Excellent condition. This has a modified back plate the make a long throat reproducer from a standard Exhibition reproducer. (rebuilt.) $135 - Sold
6. Victor I horn elbow. No dents, excellent nickel plating. (Original) --- $145 SOLD
7. Crane supports for a cylinder machine. These screw on the back of the case. Nickel plating. In excellent condition. -- $15 SOLD
8. Victor Exhibition Junior. Very rare and desirable. Excellent condition and has been rebuilt and polished. I should point out that the Exhibition Jr reproducers were nickel plated. Many, but not all, the plating has turned black. Most, if polished will see the nickel shine come out. There are a number of them out there that still have good nickel plating. Will fit on any standard Victor tonearm. Excellent condition. Also used on some Zonophone machines. --- $ 300 - Sold
9. Victor “Y” bracket that attaches to the top of the back mount bracket to hold the horn In place. This fits the larger bracket like used on the Victor IV, V, and VI. ---- $30
10. Columbia Reproducer box. Excellent condition. Has some writing on the outside of the box. Very clear stamping on the top saying “REPRODUCER”. --- $30 SOLD
11. Victor Junior Exhibition reproducer. Early pot metal version. Not rebuilt or otherwise touched. Low serial number 950. Round needle hole. Not rebuild but ready to be refurbished. --- $300 - Sold
12. Columbia long throat reproducer. Like new, not a reproduction. Rebuilt. Fully stamped under mica with Columbia information. --- $140 SOLD
(regarding the Harmony/Busy Bee/Aretino original reproducer quest I have been on....) LOL.... Darn.