Page 1 of 1
WANTED: Victrola VV-XI part
Posted: Sat Jun 20, 2020 9:59 pm
by mystangblue94
I am new to this and need a part for my tonearm. I have attached a picture. It's the pencil size part that stops the tonearm. Thanks.
Re: WANTED: Victrola VV-XI part
Posted: Sun Jun 21, 2020 12:48 am
by mattrx
I've got most anything you need for this machine, please pm me.
Thanks,
Matt
Re: WANTED: Victrola VV-XI part
Posted: Sun Jun 21, 2020 9:13 am
by JerryVan
It doesn't stop the tone arm, it trips the automatic brake.
Re: WANTED: Victrola VV-XI part
Posted: Sun Jun 21, 2020 2:59 pm
by mattrx
I saved the metal parts from a basket case XI. Pictured is what I have left, I also have the motor (working). Let me know if you need any of these parts.
Matt
Re: WANTED: Victrola VV-XI part
Posted: Sun Jun 21, 2020 10:06 pm
by Lucius1958
mattrx wrote:I saved the metal parts from a basket case XI. Pictured is what I have left, I also have the motor (working). Let me know if you need any of these parts.
Matt
If you're open to other offers, I could use the used needle container for my VV-IX.
-Bill