Page 1 of 1
FOUND: Edison Triumph Threaded Crank
Posted: Tue Jul 07, 2020 8:21 pm
by Zener424
Need a threaded crank for an Edison Triumph.
Re: WANTED: Edison Triumph Threaded Crank
Posted: Wed Jul 08, 2020 12:32 am
by JohnM
Fireside, Standard, Home, Triumph threaded cranks are all the same, just sayin’.
Re: WANTED: Edison Triumph Threaded Crank
Posted: Wed Jul 08, 2020 1:21 am
by Inigo
May I humour a bit?
I need a triumphed crank for an Edison Thread
Re: WANTED: Edison Triumph Threaded Crank
Posted: Wed Jul 08, 2020 10:00 am
by Zener424
John,
Thank you for your reply.
I wish it were true. However, I just tried a crank from my Home on the Triumph, no good.
Apparently the crank for a Fireside, Standard, & Home are the same. But the Triumph threaded shaft iss bigger in diameter, hence requiring a crank with a wider shaft.
Phil
Re: WANTED: Edison Triumph Threaded Crank
Posted: Wed Jul 08, 2020 11:20 am
by FellowCollector
Zener424 wrote:Apparently the crank for a Fireside, Standard, & Home are the same. But the Triumph threaded shaft iss bigger in diameter, hence requiring a crank with a wider shaft.
Absolutely correct. The Triumph models requires a larger diameter internal threaded crank versus the Standard, Fireside, Home.