Page 1 of 1
Help with Hexaphone 103 logo size
Posted: Sun Feb 14, 2021 10:28 pm
by Roaring20s
Will someone please provide the measurements shown in this photo.
The "overall width" and the "height of the R"
Thanks,
James.
Re: Help with Hexaphone 103 logo size
Posted: Mon Feb 15, 2021 9:27 am
by rgordon939
Hope this helps you. If you need more let me know.
Rich Gordon
Re: Help with Hexaphone 103 logo size
Posted: Mon Feb 15, 2021 9:35 am
by schweg
Phonodecal.com
Has one that might be correct
Re: Help with Hexaphone 103 logo size
Posted: Mon Feb 15, 2021 7:06 pm
by Roaring20s
Thanks Rich, that's perfect!
Just in case other folks search for it...
Overall width is... 7 - 5/16"
Height of R is... 1 - 9/16"
Also the distance from the lock is... ½"
James.
Re: Help with Hexaphone 103 logo size
Posted: Thu Feb 18, 2021 1:53 pm
by zonophpones7
I have two machines with this decal, a Hexaphone 102 and a Regina Gum machine. Both are identical in size. 176mm (approx. 6 15/16) x 43 mm (approx. 1 11/16) (measured as shown in your diagram) I do have the correct decal available on my site if needed.
Gregg