Page 1 of 1
VV-X table model for parts/restore? Ca, marketplace
Posted: Thu Mar 04, 2021 7:27 pm
by emerson
$45 buys it in Madera---looks like all the mechanical parts are there, including the bullet brake and reproducer---could not see if the crank was present.
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Thu Mar 04, 2021 8:25 pm
by cweastlick
It looks like the base is gone.
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Thu Mar 04, 2021 9:19 pm
by CharliePhono
There is a thread about this in the "crapophone" subsection of the ebay & auction section. (
viewtopic.php?f=16&t=48676) I saw the ad for this and don't know why they're saying it's in Madera (unless something changed?). The ad I saw listed it in the town of Coarsegold, CA.
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Thu Mar 04, 2021 9:59 pm
by emerson
------It does look like the base and doors? are missing but to get the the rest of what looks like the complete works for $45 is a good deal. ------It does say Coarseville? But when you hit on the photo it says Madera with a phone number
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Thu Mar 04, 2021 10:00 pm
by emerson
------It does look like the base and doors? are missing but to get the the rest of what looks like the complete works for $45 is a good deal. ------It does say Coarsegold? But when you hit on the photo it says Madera with a phone number
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Fri Mar 05, 2021 7:35 am
by GregVTLA
There was a guy on the Facebook group that bought a nice empty cabinet. Maybe this could be a donor?
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Sat Mar 06, 2021 10:24 pm
by cweastlick
I contacted the guy about the X. I asked him for some more pictures. He told me I had to come and look at it myself. I told him that I didn't live in the area and asked if it could be shipped. His response was "No!" End of correspondence.

Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Tue Mar 23, 2021 5:46 pm
by CharliePhono
I am going to pick up this old derelict today. With the sparse resources I have available, i.e., no workshop, adequate tools, etc., I rather doubt I'd be able to bring the cabinet back together, as it appears the base is missing as well as the doors. The guy told me he thought it had a crank, and it may not even have a motor for that matter. No matter, there are enough good parts on it to make it worthwhile, as Jerry B. pointed out. If the whole thing is irredeemable, the parts may show up on the Yankee Trader!
Re: VV-X table model for parts/restore? Ca, marketplace
Posted: Tue Mar 23, 2021 8:12 pm
by emerson
Oh Yes You Can---bring it back to completion. The Forum members prove that all the time, offering help with their knowledge and parts availability. AND, You can do it. So, lets hear what is all there when you pick it up---Looking forward to your next post.