Page 1 of 1
Rcord cabinet
Posted: Sat Mar 20, 2021 12:17 am
by oldtvsandtoys
ok what can you guys tell me about this cabinet? Just bought it and dont know much about it.
Re: Rcord cabinet
Posted: Sat Mar 20, 2021 12:47 am
by Roaring20s
Similar to these...
viewtopic.php?f=9&t=42297
viewtopic.php?f=2&t=31407
I do not know for what machine it belongs to.
Possibly a VV-X or a VV-XI? They have feet and a flat bottom rail.
The VV-XII has feet, but it has rounded corners.
It could be for another brand, too?
James.
Re: Rcord cabinet
Posted: Sat Mar 20, 2021 9:22 am
by phonogfp
It's a Salter, and I suspect it's for the later VV-IX with small feet.
George P.
Re: Rcord cabinet
Posted: Sat Mar 20, 2021 9:24 am
by Jerry B.
That has the potential to be a very attractive record cabinet. My guess would be the Victrola IX with the curved base and little corner feet. What are the top measurements on the cabinet?
Jerry B.
Re: Rcord cabinet
Posted: Sat Mar 20, 2021 10:45 am
by oldtvsandtoys
32H x 17W x 21D
Re: Rcord cabinet
Posted: Sat Mar 20, 2021 11:32 am
by Ripduf1
George nailed it. It is a cabinet designed to fit a table top Victrola IX. Each foot will fit to those recessed areas at each corner. It is nice to have found it with the interior still intact. - John
Re: Rcord cabinet
Posted: Sun Mar 21, 2021 4:25 am
by stetam
Very nice cabinet
Re: Rcord cabinet
Posted: Sun Mar 21, 2021 10:05 am
by audiophile102
My IX cabinet was made by Pooley and it's great, but I like yours very much. Clean it up and find a good looking IX to top it off. They are plentiful so be picky.