Page 1 of 1

Return of Home Model D

Posted: Sun Apr 11, 2021 9:59 am
by Marc Hildebrant
Group,

Many years ago (more than 30) my father picked out a Home Model D Combination in excellent shape. The phonograph went to my Brother for awhile and now he gave it to me. Since my Wife and I now live in the same house (Cape Cod) that my parents did, the phonograph was now returned "Home" (not very puny). The picture shows it on a workbench in my music studio.
IMG_0988.JPG
Marc

Re: Return of Home Model D

Posted: Sun Apr 11, 2021 11:44 am
by Phono-Phan
Glad to hear it is back "Home"

Re: Return of Home Model D

Posted: Sun Apr 11, 2021 1:49 pm
by Marc Hildebrant
Thanks Ken,

Strange how things turn out in life...

Marc

Re: Return of Home Model D

Posted: Sun Apr 11, 2021 8:49 pm
by Curt A
I don't know if you are thinking about repainting your horn, but don't... If you want it to look better, touch up the scratches with a black Sharpie marker, then spray the horn with WD40 inside and out, then wipe off the excess with a clean cloth. This isn't a joke, it really works.

Re: Return of Home Model D

Posted: Sun Apr 11, 2021 8:55 pm
by tomb
That home is in good shape. The stripes look great. Tom

Re: Return of Home Model D

Posted: Sun Apr 11, 2021 10:01 pm
by Marc Hildebrant
Curt A,

Thanks for the tip. Does the WD-40 re-do the paint that has oxidized ?

Tom, yes, the stripes are nice looking with the Gold and Blue.

Marc

Re: Return of Home Model D

Posted: Mon Apr 12, 2021 1:43 pm
by Curt A
Marc Hildebrant wrote: Sun Apr 11, 2021 10:01 pm Curt A,

Thanks for the tip. Does the WD-40 re-do the paint that has oxidized ?

Tom, yes, the stripes are nice looking with the Gold and Blue.

Marc
Yes, WD40 reinvigorates oxidized or dried out paint, I have used this many times especially on black japanned horns with excellent results. It does nothing to hurt or remove paint...

Re: Return of Home Model D

Posted: Mon Apr 12, 2021 3:54 pm
by Marc Hildebrant
Group,

Is there a pdf of the Edison manual for the Model D Combination available ? I would like to set up the load on the spindle and where to lubricate.

Marc