Setting Reproducer Height on Edison Diamond Disc S-19
Posted: Wed May 19, 2021 8:13 pm
Group,
When you are setting the Reproducer Height on the Edison Diamond Disc Phonographs, make sure that the two set screws 9 NO 1 & 2) on the top support are loose and the lifting Handle is up (1\8 inch) , per the instructions. This lets the adjustment near the horn work and set the height, NOT the lifting handle.
Marc
When you are setting the Reproducer Height on the Edison Diamond Disc Phonographs, make sure that the two set screws 9 NO 1 & 2) on the top support are loose and the lifting Handle is up (1\8 inch) , per the instructions. This lets the adjustment near the horn work and set the height, NOT the lifting handle.
Marc