Page 1 of 1
Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 12:31 pm
by BigC
I just got this from a auction and it arrived damaged. I'm not sure what model it is but any information on it would be awesome. The tonearm elbow is broken and the joint where the reproducer attached to the tonearm has come lose. Anyone who was a spare tonearm message me please.
If you have a spare motor that would fit also please message me because there is no motor just parts. Any help would be greatly appreciated.
Re: Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 4:08 pm
by gunnarthefeisty
pretty sure that IS the motor, just disassembled.
Re: Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 5:39 pm
by BigC
Yes thats what's left of the motor it was stripped for parts. Still if I can at least get the elbow I could get it running. Thanks
Re: Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 6:06 pm
by Inigo
The elbow in the machine seems good, is it seized? You could try to extract it, then polish the junctures to give it mobility... If it is of pot metal, it simply has swelled a bit. If you're lucky when extracting it, it could still be useful
Re: Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 8:57 pm
by BigC
No the elbow was damaged in shipping. The first two pictures are what was damaged. Basically the complete tonearm was broken.
Re: Wanted: Columbia Tabletop parts
Posted: Sun Oct 10, 2021 11:08 pm
by gunnarthefeisty
BigC wrote: Sun Oct 10, 2021 5:39 pm
Yes thats what's left of the motor it was stripped for parts. Still if I can at least get the elbow I could get it running. Thanks
what exactly is missing from the motor?
Re: Wanted: Columbia Tabletop parts
Posted: Mon Oct 11, 2021 2:01 am
by BigC
The large gear that covers the spring, the governor, the spring itself and some small screws. It was parted out.
Re: Wanted: Columbia Tabletop parts
Posted: Mon Oct 11, 2021 2:02 am
by BigC
I'll try to put most of it together and see what you think.