WANTED: various parts for VV-XI
Posted: Wed Dec 22, 2021 8:38 am
I was recently given a VV-XI #521783 (1919) with a request from the original owner's family that I try to save it. It was delivered to me in pieces and, after going through everything, it looks like I need the following parts:
No.2 reproducer needle arm balance springs and gaskets
One large and one small door hinge. These appear to be some type of pot metal alloy, not the brass hinges some other models use.
One door knob. Don't know if there are more than one type, but these are about .730" in diameter, nickel plated brass. Condition of the plating is not important; I have other items to re-plate and another one won't matter.
Nickel anode. There are on-line sources, but if anyone has some nickel left over from your re-plating project that you aren't going to use, we should be able to work out a deal.
Adjusting knob/screw for the small glass speed control. Again, condition of the plating isn't important.
Key
Let me know if you any of these items you are willing to sell. Thanks.
Dale H
No.2 reproducer needle arm balance springs and gaskets
One large and one small door hinge. These appear to be some type of pot metal alloy, not the brass hinges some other models use.
One door knob. Don't know if there are more than one type, but these are about .730" in diameter, nickel plated brass. Condition of the plating is not important; I have other items to re-plate and another one won't matter.
Nickel anode. There are on-line sources, but if anyone has some nickel left over from your re-plating project that you aren't going to use, we should be able to work out a deal.
Adjusting knob/screw for the small glass speed control. Again, condition of the plating isn't important.
Key
Let me know if you any of these items you are willing to sell. Thanks.
Dale H