https://forum.talkingmachine.info/
PM me your address and I'll mail you one.MTPhono wrote: Fri Dec 31, 2021 1:19 am I am need of an Edison DD set screw as shown in the photo below. Any help would be appreciated. I drilled out the one on the left which now needs to be replaced.
Thanks - Scott
2021-12-25 18.48.31.jpg
Of course I could but I really don't like modern hardware on my machines if possible. I figured somebody probably has a pile of these. Happy to pay for the part and shipping.Dave D wrote: Fri Dec 31, 2021 6:19 am At the risk of sounding obvious, can't you get that from the local hardware store? Of course, if you really want all original, it makes sense to find one. Otherwise, a hex head found locally will be just fine.
Dave D
PM on it's way - thanks Fran!fran604g wrote: Fri Dec 31, 2021 6:21 amPM me your address and I'll mail you one.MTPhono wrote: Fri Dec 31, 2021 1:19 am I am need of an Edison DD set screw as shown in the photo below. Any help would be appreciated. I drilled out the one on the left which now needs to be replaced.
Thanks - Scott
2021-12-25 18.48.31.jpg
Fran