Page 1 of 1
Rigid Arm E $500 Reserve on FleaBay
Posted: Wed Jan 26, 2022 3:26 pm
by zipcord
Re: Rigid Arm E $500 Reserve on FleaBay
Posted: Wed Jan 26, 2022 4:53 pm
by bearcat
I wonder what damage lies underneath the hose clamp and in-between elbow and horn.
Driving distance for cheeseheads.
Nice machine.
Re: Rigid Arm E $500 Reserve on FleaBay
Posted: Thu Jan 27, 2022 9:15 pm
by Phono-Phan
I also wonder about the reproducer and swing arm. The swing arm doesn't go all the way down so the sound won't go into the tone arm. One picture shows the needle bar might have a triangle hole for the needle. I wouldn't doubt the elbow has damage at a seam because of the added clamp. The clamp also has pushed in the seam at the back. Wrong crank and no record hold down. A nail is used on the crank shaft. The swing arm pivot screw is square which isn't correct. I would be curious what this ends up going for.
Ken Brekke