Page 1 of 1
Found: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Mon Mar 28, 2022 11:16 am
by colmike1
Would anyone have a spare support arm off of a Pathé Cylinder phonograph with a glass horn ( or detailed pics and measurements so I can have one made)? Please let me know. Thanks.
Mike Wohl
Re: Wanted: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Mon Mar 28, 2022 6:35 pm
by Bruce
Mike
Here is a photo of the support arm you are looking for. There are different lengths so you will need to measure how long an arm you will need.
I watched Ebay (including Ebay France) for several years before finding a replacement for my Pathé.
- IMG_2214.jpg (99.85 KiB) Viewed 1372 times
I hope you have better luck finding one. If not let me know and I can send more detailed photos and measurements for you.
Nice machine by the way and it will look spectacular with that lovely glass horn.
Bruce
Re: Wanted: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Mon Mar 28, 2022 7:54 pm
by GeorgeDixon
Re: Wanted: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Wed Mar 30, 2022 8:34 am
by colmike1
Bruce wrote: Mon Mar 28, 2022 6:35 pm
Mike
Here is a photo of the support arm you are looking for. There are different lengths so you will need to measure how long an arm you will need.
I watched Ebay (including Ebay France) for several years before finding a replacement for my Pathé.IMG_2214.jpg I hope you have better luck finding one. If not let me know and I can send more detailed photos and measurements for you.
Nice machine by the way and it will look spectacular with that lovely glass horn.
Bruce
Thank you Bruce. This helps put me on the right track to find or hand create a replacement part. I too fell in love with the horn, which is why I'm trying to get this machine back to its original Glory.
Mike Wohl
Re: Wanted: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Wed Mar 30, 2022 8:37 am
by colmike1
Thank you GeorgeDixon. I will measure the gap I currently have and see if this is approximately the right length. It definitely looks much better than anything I could ever create.
Mike Wohl
Re: Found: Horn Support Arm for a Pathé Cylinder Phonograph w/ Glass Horn
Posted: Thu Mar 31, 2022 9:14 am
by colmike1
Thank you to my friends across the pond. That piece on eBay will finish this phonograph. I could not have done this without you guys!
Mike Wohl