The Talking Machine Forum — For All Antique Phonographs & Recordings

Looking for the tone arm and mount as both mine have been broken.
The mounting bracket doesn't have a long collar that insets into the machine. If it did it would get in the way of the Brunswick volume control. This bracket fits flush with the top of the machine. I'd love to get this one as close as I can to the original equipment, let me know if you have anything! If interested in trades I have a very nice bronze orthophonic tone arm with bracket that I can't use as I found it's configured differently and, you know, you can't reposition those brackets!

I'm pretty sure that I have one of those. If you don't find one by the 10th of July, contact me and I'll check out my bins.

Ken Danckaert
[email protected]

Still looking...

There are two versions of the Ultona tone arm;one is a double diaphragm with the needle for Edison Diamond Discs, the second is the single diaphragm, which is what you have.edisonplayer.

Aside from the fact that my reproducer seems to have a pot metal retaining ring that won't budge (and I don't want to destroy it), the reproducer is in good shape so I'll keep that, just looking for the arm itself. Thanks!