Page 1 of 1
Vic M/MS/III and V horn elbows--interchangeable?
Posted: Mon Oct 03, 2022 6:47 am
by jboger
Well, I know the Victor M and MS horn elbows are interchangeable as I have both models. And I think the Vic III is the same as those. What I don't know--and would appreciate if someone could tell me--is whether or not the Vic V is the same. That is, will a Vic V horn elbow fit a Vic III and/or the M and MS models?
John
Re: Vic M/MS/III and V horn elbows--interchangeable?
Posted: Mon Oct 03, 2022 7:59 am
by Ripduf1
Hi John,
Yes they are the same dimensions M/MS/III to the Vic V elbow. There is a small difference in the M/MS/Fancy D and Square D which is the "Pin" Stop vs. "Step" Stop as shown in the two pictures. The "Pin" Stop is earlier, the "Step" stop is later (Victor III,IV,V.) John
Re: Vic M/MS/III and V horn elbows--interchangeable?
Posted: Mon Oct 03, 2022 9:19 am
by jboger
Thank you, Ripduf1. That's very good to know. And thanks for the taking the times to take the photos. Very much appreciated.
John