Page 1 of 1
Very early DGAG machine with travelling arm.
Posted: Sun Jan 29, 2023 5:08 pm
by nostalgia
What is there to say about this very early DGAG machine. I can't find an equivalent in the HMG book, so I guess this is an exclusive German model. Is it complete, we can see the witch hat horn is not looking good, but I am more focused on the rest of the machine. It looks very scrappy to my eyes...but it is still interesting to know more about it if possible, since it is a very early model.
Re: Very early DGAG machine with travelling arm.
Posted: Sun Jan 29, 2023 10:57 pm
by gramophone-georg
Wrong crank, arm is upside down, and that plate across the speed control and crank hole I think is home made. Other than that, yes, authentic and quite rare.
Here's mine
Re: Very early DGAG machine with travelling arm.
Posted: Mon Jan 30, 2023 10:47 am
by Oedipus
It was shown as 'No. 3' in a November 1903 DGAG catalogue; with a nickel-plated horn, painted red inside, it cost 35 Marks, or 39 Marks with a brass horn. Quite right, it was not sold in the UK, where the equivalent was the New No. 3 or the 3A. But that does not make it unique to Germany; DGAG exported to various other countries in the G & T territory.
Re: Very early DGAG machine with travelling arm.
Posted: Mon Jan 30, 2023 2:23 pm
by nostalgia
Great machine you've got there Georg, thanks a lot for sharing.
Thank you too Oedipus for your information, it is always much appreciated. Yes, I guess DGAG defininitely must have exported to Scandinavia too? At least "many" DGAG machines are found here, both Monarchs and now also this pre WW1 model.
I think however I will pass on this particular one myself...
Re: Very early DGAG machine with travelling arm.
Posted: Mon Jan 30, 2023 4:27 pm
by alang
nostalgia wrote: Mon Jan 30, 2023 2:23 pm
...
I think however I will pass on this particular one myself...
Really?
I'd throw out a bunch a common machines or portables to have such a rare machine
Andreas
Re: Very early DGAG machine with travelling arm.
Posted: Tue Jan 31, 2023 2:35 pm
by nostalgia
I did not tell the complete story, Andreas. The current bid is € 450, and after seeing Georg's machine, and now knowing it is not complete, something I also suspected, I feel this is a machine I never will be able to complete.,,
And, my house and storage locker is full, and...I should not say it, I have plans to buy another portable in the next few days, one that I have wanted for some months
And, €450 is maybe not much for this machine, I really don't know, but it is still more than I like to spend on another project.
Re: Very early DGAG machine with travelling arm.
Posted: Tue Jan 31, 2023 2:48 pm
by alang
OK, makes sense. I thought it might have been cheap like most other machines in your region
Andreas