The Talking Machine Forum — For All Antique Phonographs & Recordings

I’m looking for a hardware set to mount the magazine base in a Victor 10-50 or 9-55.

Would appreciate any leads. A now unusual thread #14-24. (Yes, #14 in the special series)
I’d like to find original bolts rather than modify the threads in the record guide.
Oval black enamel head, slotted.

Thanks!
Mark

McMaster-Carr sells some pretty scarce hardware. Not sure if they have #14 size bolts though. Check them out.

Thanks, yes, McMaster and Blacksmith Bolt are good sources for hardware but no dice this time.
eBay sometimes has NOS obsolete fasteners but what is available now in #14 is either too short or has the wrong type of head.

Hopefully some original hardware will show up.

Mark

Thanks to Barry for supplying three of the missing bolts!
I can install the magazine base back in the 9-55 while I look for the wayward bolt.

Mark