Found: Victor D Governor Speed Control Linkage Arm Support Bracket
Posted: Thu Jul 04, 2024 3:09 am
Hello folks,
My restoration of two Victor D continues with parts trickling in thanks to many of you!
Found: I'm now in need of a Governor Speed Control Linkage Arm support bracket. Photo attached. If any one has something like this in parts box please let me know. Original preferred, though a replica is fine.
Solved with a standard 12" cast iron turntable and a 5/16" ID ⅜" OD sleeve bearing! I'm also still looking for a 12" turntable to fit a 5/16 spindle though I'm waiting on some spindle bushings that should allow a turntable with ⅜ diameter hole to be used.
Best
Michael
My restoration of two Victor D continues with parts trickling in thanks to many of you!
Found: I'm now in need of a Governor Speed Control Linkage Arm support bracket. Photo attached. If any one has something like this in parts box please let me know. Original preferred, though a replica is fine.
- IMG_3717 (1).jpeg (51.18 KiB) Viewed 543 times
Best
Michael