WTB: Crank for International Zonophone
Posted: Mon Jul 29, 2024 10:37 pm
I'm looking for a crank for the pictured Zonophone. The cranks for front mount machines won't work. Here are some details:
The winding shaft is 21/64" in diameter and the end of the shaft is 1 ¾" to the outside of the case. Remember that the shaft is split so the "pin" in the crank fits in the split. This will add another ¾" to where the "pin" will bottom out in the split.
I've provided some pictures to help you visualize the above.
You can email me at: [email protected]
Many thanks in advance for your help!
Dan
The winding shaft is 21/64" in diameter and the end of the shaft is 1 ¾" to the outside of the case. Remember that the shaft is split so the "pin" in the crank fits in the split. This will add another ¾" to where the "pin" will bottom out in the split.
I've provided some pictures to help you visualize the above.
You can email me at: [email protected]
Many thanks in advance for your help!
Dan