Wanted:- Gear for Vic "O" / Vic "I" motor-- see pics
Posted: Tue May 13, 2025 10:00 pm
The current wanted post for Vic I parts, motivated me to pull out a motor I've had for quite awhile.
Harold Braker's Victor Motor Guide identifies it as the "CM" motor, used on some Vic O's and some Vic I's...and also apparently some of the very early VV-IV's. As it turns out, it is NOT the motor the other forum member needs for his Vic I case. As Jerry mentioned. there are a few different motors used in Vic I's/
Below are pics of my motor, Harold Braker's guide pic and a pic of one I found online.
**I am missing the small gear that mounts just above the winding shaft gear (see arrow in first pic)-- If anyone has that gear floating around in your parts piles, I'd love to talk with you.
Thanks-
Brad Abell
Harold Braker's Victor Motor Guide identifies it as the "CM" motor, used on some Vic O's and some Vic I's...and also apparently some of the very early VV-IV's. As it turns out, it is NOT the motor the other forum member needs for his Vic I case. As Jerry mentioned. there are a few different motors used in Vic I's/
Below are pics of my motor, Harold Braker's guide pic and a pic of one I found online.
**I am missing the small gear that mounts just above the winding shaft gear (see arrow in first pic)-- If anyone has that gear floating around in your parts piles, I'd love to talk with you.
Thanks-
Brad Abell
- Vic 1 motor GEAR a.JPG (68.5 KiB) Viewed 110 times
- Vic o&1 Motor.jpg (63.18 KiB) Viewed 110 times