FOR SALE: VICTOR & COLUMBIA SUPPORT / TONEARMS
Posted: Mon Jul 07, 2025 1:50 pm
Here for your consideration are six horn support arms and tonearms. Two of them are, I believe, Victor support arms. One is longer than the support arm normally found on a Victor R. It is bronze plated but does not have the oxide coating. I believe that someone buffed the oxide costing off. The underlying bronze is in good shape the oxide coating could be pit back on. I believe it was made to allow the machine to take a longer horn. I want $60 for this arm. SOLD
The next one is the same length as normally found on the Victor R. It would have been made for the metal tone arm . This was normally found on the early Victor R or the Victor Monarch Special. This has nickel plating so I would not expect it to be for the Victor R. The R would normally have a bronze oxide finish, but it is the correct length for the Victor R. I want $55 for this support arm. SOLD
The next one is a replacement wood arm for a Victor front mount machine. The picture shows the dimensions. I want $15 for the arm.
The next two are tonearms for some Columbia and Columbia client disc machines. They are both original and in very good condition. They are the same length. I want $40 for each of them. SOLD
The last is a reproduction Columbia support arm. It is well done but still needs final polishing. It is one of the better reproductions in that it has been cast with the hollow on the underside of the arm. I want $30 for this. SOLD
Payment must be by check. Shipping is extra. If interested, CONTACT ME AT [email protected] not by PM.
Ken Danckaert
The next one is the same length as normally found on the Victor R. It would have been made for the metal tone arm . This was normally found on the early Victor R or the Victor Monarch Special. This has nickel plating so I would not expect it to be for the Victor R. The R would normally have a bronze oxide finish, but it is the correct length for the Victor R. I want $55 for this support arm. SOLD
The next one is a replacement wood arm for a Victor front mount machine. The picture shows the dimensions. I want $15 for the arm.
The next two are tonearms for some Columbia and Columbia client disc machines. They are both original and in very good condition. They are the same length. I want $40 for each of them. SOLD
The last is a reproduction Columbia support arm. It is well done but still needs final polishing. It is one of the better reproductions in that it has been cast with the hollow on the underside of the arm. I want $30 for this. SOLD
Payment must be by check. Shipping is extra. If interested, CONTACT ME AT [email protected] not by PM.
Ken Danckaert