The Talking Machine Forum — For All Antique Phonographs & Recordings

A bit of a shot in the dark, but looking for the removable back panel that goes on a 9-1 ("Florenza") or 9-15 if anybody out there has a parts machine, preferably with the two original attachment screws at the lower corners although that is not critical. (These models had the same cabinet.) Also interested in the miter gears pictured here. My example is missing the larger one and need one for a pattern to have some new brass ones made up.

Clay

Have you tried George Vollema at victrola 'at' triton 'dot' net for the back panel?

Have you checked to see if the knuckle joints I suggested to replace the gears would fit?

Thanks John. Will try George Vollema. Holding off on the knuckle joints for now. May try if replication does not work out.

Clay

George made a valiant search, but did not have the panel.

Clay