WTB: Early Victor 10" turntable
Posted: Sat Apr 18, 2026 8:01 pm
Looking for an early Victor 10" turntable like the one used on the threaded spindle
Victor M. The spindle hole diameter is 5/16" whereas the spindle hole diameter
on a Victor III or IV platter is ⅜". The ⅜ hole is 1/16" to large and will wobble.
The spindle hole depth on the early Victor turntable is ⅝".
If you have the early one, let me know.
Thx
Victor M. The spindle hole diameter is 5/16" whereas the spindle hole diameter
on a Victor III or IV platter is ⅜". The ⅜ hole is 1/16" to large and will wobble.
The spindle hole depth on the early Victor turntable is ⅝".
If you have the early one, let me know.
Thx