Page 1 of 1
Trade D,V,VI bracket for IV,MS bracket
Posted: Sun Sep 25, 2011 8:54 pm
by penman
I'd like to trade the bracket on my MS, which is too short and is really the bracket for a V,D, and VI for the correct one (M, MS, IV). I only want the bracket, no hardware, clamp, etc.
Photo below, the bracket is all original not repainted, striping and paint are 95%+. Thanks for looking.
George
Re: Trade D,V,VI bracket for IV,MS bracket
Posted: Mon Sep 26, 2011 11:21 am
by Jerry B.
It amazes me that there are so many long time collectors that do not realize there is a difference between the brackets. Sorry, but I have no spare Vic III size back brackets. Jerry Blais
*
When considering the purchase of a rear mount Victor, ALWAYS drop the needle near the spindle. It should land on or very close to the spindle. Jerry Blais
Re: Trade D,V,VI bracket for IV,MS bracket
Posted: Mon Sep 26, 2011 11:55 am
by penman
Jerry:
Thanks for the reply. Please keep your eyes out for me, it would be appreciated. When I purchased the machine with the wrong bracket my plan was to eventually convert it back to front mount. The bracket in the photo came on a different machine (also MS) than in the photo, which originally was a front mount. However after purchasing the mahogany horn from you, that machine looks so good I'm going to keep it that way. So..........
George