Page 1 of 1
Need Edison square box Standard crank
Posted: Mon Jul 09, 2012 4:52 am
by john9ten
Hello
A friend of mine needs a crank for his Edison Square Box Standard, can anyone help?
Thanks
John Robles
Re: Need Edison square box Standard crank
Posted: Mon Jul 09, 2012 9:54 am
by Jerry B.
The earliest square top Standards have a different crank than the later ones. I don't know if the dividing line was the change from two to four clip but I do know there is a difference. The winding shaft is smaller on the early machines. Jerry Blais
Re: Need Edison square box Standard crank
Posted: Fri Jul 13, 2012 1:42 pm
by Andersun
There is one on eBay right now.