Page 1 of 1
Platter ID
Posted: Sat Aug 18, 2012 3:56 pm
by dutchman
attachment=1]004.JPG[/attachment]
I have 7 or 8 unidentified platters which need a new home. This is the first one I cleaned up with a wire wheel and buffed the rim. This platter is a tad under 10 inches. Any guess as to what it belongs? TIA
Re: Platter ID
Posted: Sat Aug 18, 2012 11:40 pm
by Orthophonic
Kinda looks like a Columbia.
Re: Platter ID
Posted: Sun Aug 19, 2012 12:02 am
by m0xiemama
Orthophonic wrote:Kinda looks like a Columbia.
That's what I was thinking.
Re: Platter ID
Posted: Sun Aug 19, 2012 9:02 am
by dutchman
Thanks.
Re: Platter ID
Posted: Sun Aug 19, 2012 10:41 pm
by mattrx
Looks very much like the platter on my Grafonola. No indention for the cross bar on a Victor. The spindle on the Grafonola is conical and the hole in your platter looks similar.
Re: Platter ID
Posted: Mon Aug 20, 2012 1:20 pm
by dutchman
Yep I thought this platter looked like the one on my Standard Model A - it fits the A. Thanks for the input....
Re: Platter ID
Posted: Mon Aug 20, 2012 1:53 pm
by estott
If not Columbia it could be something Swiss.