I recently had a water line leak and drip on my walnut XVII. The water stains are fresh and I was wondering if anyone had any suggestions on how to repair them. Thanks in advance for any advice. I will also post this in the Machines section.
Ken Brekke
Recent water damage help requested
- Phono-Phan
- Victor V
- Posts: 2508
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Recent water damage help requested
- Attachments
-
- IMG_5011.jpg (79.44 KiB) Viewed 1398 times
-
- IMG_5007.jpg (78.56 KiB) Viewed 1398 times
-
- Victor III
- Posts: 955
- Joined: Wed Feb 11, 2009 1:30 pm
Re: Recent water damage help requested
If it were mine, I'd get a clean old piece of t-shirt, pad it up and get it medium damp/damp dry with denatured alcohol. Then I'd start doing "touch downs and take offs" with the alcohol dampened pad. Take your time. What you have is like a big "glass ring" with dampness under the finish. The alcohol should drive it out. I had success in reversing a very nasty "glass ring" on my 1920s Starr upright piano using that technique. Sorry you had that happen, but I suspect that it will come right if you're careful and take your time.
Regards,
Martin
Regards,
Martin
-
- Victor O
- Posts: 85
- Joined: Wed Oct 19, 2016 2:56 pm
- Location: Michigan
Re: Recent water damage help requested
Ken,martinola wrote:If it were mine, I'd get a clean old piece of t-shirt, pad it up and get it medium damp/damp dry with denatured alcohol. Then I'd start doing "touch downs and take offs" with the alcohol dampened pad. Take your time. What you have is like a big "glass ring" with dampness under the finish. The alcohol should drive it out. I had success in reversing a very nasty "glass ring" on my 1920s Starr upright piano using that technique. Sorry you had that happen, but I suspect that it will come right if you're careful and take your time.
Regards,
Martin
Martin is absolutely correct. Do not use Lemon oil or orange oil or steel wool (not only causes physical damage but it will chemically react with walnut and oak causing black spots). Lay the phonograph on its side and take your time. If the finish starts to get a little sticky, let it set for a few days. This method should completely repair the damage. Patience is paramount while doing this.
Beautiful phonograph!
Roy