Victor extra holes in back of cabinet

Discussions on Talking Machines & Accessories
Post Reply
columbia1spring
Victor II
Posts: 432
Joined: Wed Apr 22, 2015 9:17 am
Personal Text: If I have no friends, then who’s reading this?
Location: Central Florida

Victor extra holes in back of cabinet

Post by columbia1spring »

Please correct me if I am wrong...
On the Victor Front mount/ rear mount phonographs I understand that they would sell a front mount with a plaque
covering the back bracket mounting holes. But what did they put over the holes if the machine was sold as a
rear mount? The picture shows front mount holes, should they be covered with a plaque as well? I read this is correct and only done for a short time while in transition from front to rear mount. Again.... please correct me if im wrong.

User avatar
Phonolair
Victor III
Posts: 615
Joined: Wed Jan 07, 2009 4:23 pm
Location: Michigan

Re: Victor extra holes in back of cabinet

Post by Phonolair »

This is what the plate looks like that covers the screw holes for the back mount bracket on a front mount machine.
P1110939.jpg
This is a plug that is seen on larger front mount machine to cover the front mount holes when the back bracket was used. I've never heard of it being used for anything other than covering the front mount holes even though there is a hole in it.
P1110941.jpg
This plug only fits larger front mount machines and not the E or R models. Most of the time the front mount holes are just left exposed. I have seen more than once where the metal plate was trimmed and tacked over the front mount holes also.

Regards, Larry Crandell

columbia1spring
Victor II
Posts: 432
Joined: Wed Apr 22, 2015 9:17 am
Personal Text: If I have no friends, then who’s reading this?
Location: Central Florida

Re: Victor extra holes in back of cabinet

Post by columbia1spring »

I have seen that plug before, I am not sure where though, it could have been yours or at a show....
Just cant remember!

User avatar
Phono-Phan
Victor V
Posts: 2814
Joined: Fri Apr 06, 2012 9:38 pm
Location: Plover, WI

Re: Victor extra holes in back of cabinet

Post by Phono-Phan »

Is that a rigid arm MS Larry?
Years ago I saw and accessory ad for a needle tin holder on a rod that went in the hole on the cover plug in your picture. I wish I had a copy of the ad now.

User avatar
Phonolair
Victor III
Posts: 615
Joined: Wed Jan 07, 2009 4:23 pm
Location: Michigan

Re: Victor extra holes in back of cabinet

Post by Phonolair »

Phono-Phan wrote:Is that a rigid arm MS Larry?
Years ago I saw and accessory ad for a needle tin holder on a rod that went in the hole on the cover plug in your picture. I wish I had a copy of the ad now.
Yes Ken good eye, it is a Rigid Arm MS.

I have never seen a needle holder for this plug hole. It would be interesting to see one or find out the use of the hole anyway.

I don't have one but I have seen the needle holders that fasten to the back bracket thumb screw. They seldom show up.

Regards, Larry Crandell

Post Reply