![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
WANTED: Victor RE-45 Legs - FOUND
-
HisMastersVoice
- Auxetophone
- Posts: 2587
- Joined: Wed Jan 14, 2009 5:01 am
WANTED: Victor RE-45 Legs - FOUND
Found a beautiful RE-45 today, the only flaw being that someone sawed the legs in half long ago and I'd like to find a decent set of legs to put on it. If you have a junk cabinet with good legs, let me know!
-
Uncle Vanya
- Victor IV
- Posts: 1269
- Joined: Sun Oct 25, 2009 12:53 pm
- Location: Michiana
Re: WANTED: Victor RE-45 Legs
Give me a ring, OM.
-
beaumonde
- Victor III
- Posts: 616
- Joined: Wed Jan 07, 2009 2:13 pm
- Location: On Chicago's South Side
Re: WANTED: Victor RE-45 Legs
Congrats on finding the Electrola in any case, Brandon. Hopefully you will find your feet....(what idiots will do! 
)
)Adam
-
Kiwi
- Victor O
- Posts: 85
- Joined: Fri Jan 23, 2009 5:48 pm
Re: WANTED: Victor RE-45 Legs
It looks to be in fantastic condition.
Is this a 1929 or a 1930 model?
Is this a 1929 or a 1930 model?
-
gregbogantz
- Victor II
- Posts: 393
- Joined: Thu Jan 08, 2009 5:03 pm
Re: WANTED: Victor RE-45 Legs
The Victor R-32, R-52, RE-45, and RE-75 are all 1929 models. They all use the same micro-synchronous tuners and power amp chassis and are the only models to use the unique and exceptionally good speaker that they have. The 1930 models have different model numbers and have different chassis and speakers. No other Victor or RCA in this era sounds as good as the 1929 models.
Collecting moss, radios and phonos in the mountains of WNC.
-
chem_jv
- Victor O
- Posts: 79
- Joined: Mon Sep 20, 2010 8:28 pm
- Location: Saint Charles, MO
Re: WANTED: Victor RE-45 Legs
Brandon,
I went down to Home Depot and purchased some that were already turned for my RE-45 project. They are not an exact match, but only a close inspection by a knowledgeable collector would be able to tell. Another nice part is that now the cabinet sits about an 1" to 1.5" higher. Give me a call or message and I can tell you what I did. How are the electronics?
Joe
I went down to Home Depot and purchased some that were already turned for my RE-45 project. They are not an exact match, but only a close inspection by a knowledgeable collector would be able to tell. Another nice part is that now the cabinet sits about an 1" to 1.5" higher. Give me a call or message and I can tell you what I did. How are the electronics?
Joe