New Machine

Discussions on Talking Machines of British or European Manufacture
User avatar
fran604g
Victor VI
Posts: 3992
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: New Machine

Post by fran604g »

I second FloridaClay's words. My brother frequents a local Goodwill and has bought dozens and dozens of 78's there. Yard sales are a great place to look as well, I've seen crates full that people just want to be rid of.

You can generally tell the older 78's apart from the newer vinyl ones because they are usually thicker and heavier, if I can make such a generalized statement.

Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
edisonphonoworks
Victor IV
Posts: 1566
Joined: Wed Oct 21, 2009 10:50 am
Personal Text: A new blank with authentic formula and spiral core!
Contact:

Re: New Machine

Post by edisonphonoworks »

Very Very basic, what to look for. 78s are 10" in diameter, and very brittle, it is a record of this kind that will play on a talking machine. It is preferable to play acoustic 78s, so you look for thicker (but ones that do NOT say Edison. ) In fact to start off, look for a Columbia label that has copper color on it, or blue and gold and dates like 1908, or Columbia with a black and white label with white notes, and 1908, 1912 date. Any record that says "Victor talking machine co" (not RCA) will certainly play on your machine. Brunswick with a black, red and white label work well too, the edges are rounded over rather than sharp angles, anything with sharp angled edges are late 78s, and it will play, but not sound as "right" as the early ones. I hope this helps.

Joe_DS
Victor I
Posts: 190
Joined: Tue Dec 17, 2013 10:15 pm

Re: New Machine

Post by Joe_DS »

If you're the type who takes along a smartphone or iPad, with internet access, when you go to flea markets, etc., you might also find the information on this site helpful --

http://www.78discography.com/

Normally, 78s are marked with a catalog number and those numbers were issued in sequence corresponding with the date the record was recorded and its release date/pressing.

For example, a victor record with the number 19001 would have been recorded in 1922, while a Victor record with the number 27500 would have been recorded in 1941. (There are exceptions, of course, since some records remained in the catalog for years, so you could find a 1940s pressing of an early 1930s recording, but generally, this works well for dating records.)

Joe

User avatar
Lucius1958
Victor Monarch
Posts: 4021
Joined: Tue Dec 14, 2010 12:17 am
Location: Where there's "hamburger ALL OVER the highway"...

Re: New Machine

Post by Lucius1958 »

edisonphonoworks wrote: 78s are 10" in diameter, and very brittle,
Except for the ones that are anywhere from 5" to 14"in diameter…

Bill

User avatar
FloridaClay
Victor VI
Posts: 3708
Joined: Wed Jan 26, 2011 7:14 pm
Location: Merritt Island, FL

Re: New Machine

Post by FloridaClay »

Lucius1958 wrote:
edisonphonoworks wrote: 78s are 10" in diameter, and very brittle,
Except for the ones that are anywhere from 5" to 14"in diameter…

Bill
And I recently acquired a little 4" 78 put out by General Motors extolling the virtues of the newly introduced 1932 Chevrolet.

That's rare though. 99% of what you will find are 10" and 12" 78s. Most of the 12" ones tend to be classical music.

Clay
Arthur W. J. G. Ord-Hume's Laws of Collecting
1. Space will expand to accommodate an infinite number of possessions, regardless of their size.
2. Shortage of finance, however dire, will never prevent the acquisition of a desired object, however improbable its cost.

US PHONO
Victor II
Posts: 307
Joined: Wed Dec 12, 2012 7:34 am

Re: New Machine

Post by US PHONO »

edisonphonoworks wrote: Except for the ones that are anywhere from 5" to 14"in diameter…

Bill
I have very big hands :-)
Attachments
imp.jpg
imp.jpg (52.44 KiB) Viewed 1521 times

Post Reply