WANTED: Threaded stud for automatic recorder

Buy, sell, or trade your phonograph-related items here [except music]
Forum rules
Post Reply
User avatar
rizbone
Victor III
Posts: 544
Joined: Tue May 08, 2012 6:17 pm
Location: Maryland

Re: WANTED: Threaded stud for automatic recorder

Post by rizbone »

If you find someone who has these I need one for a standard speaker repro.
Top
User avatar
ehs004
Victor III
Posts: 794
Joined: Tue Apr 05, 2011 8:32 pm

Re: WANTED: Threaded stud for automatic recorder

Post by ehs004 »

Something may be in the works ? If so i will share any info i receive. Eric
Top
User avatar
ehs004
Victor III
Posts: 794
Joined: Tue Apr 05, 2011 8:32 pm

Re: WANTED: Threaded stud for automatic recorder

Post by ehs004 »

ehs004 wrote:Looking for threaded stud that limits tail weight. [email protected]
Thanks Eric
bump
Top
User avatar
ehs004
Victor III
Posts: 794
Joined: Tue Apr 05, 2011 8:32 pm

Re: WANTED: Threaded stud for automatic recorder

Post by ehs004 »

rgordon939 wrote:Make sure that you get the correct one. Here are the three screws for Automatics. The top one is for an early Automatic with a thin weight. The middle one is for the recorder and has a collar above the threaded area. The bottom one is for a later Automatic with the heavier weight, it is also a little longer.

Rich Gordon
I need the one in middle picture. Thanks Eric
Top
Post Reply

Return to “Yankee Trader”