Help identifying an Edison internal horn machine

welshfield · Post by **welshfield** » Sun Oct 12, 2014 3:25 pm

(I hope the photo is attached.)
This Edison is being offered at a farm auction tomorrow. Can someone advise what model it may be and is it worth my bid? I have a number of external horn cylinder players and an Amberola 30 already so I really do not need any more....but who's counting.
John

chrisg · Post by **chrisg** » Sun Oct 12, 2014 3:32 pm

Edison A-75 I bought a nice one for $300 locally from a collector

phonogfp · Post by **phonogfp** » Sun Oct 12, 2014 3:41 pm

That's an Edison Amberola 75.

It's essentially the same machine as your Amberola 30, but with a second mainspring and larger cabinet with record storage.

George P.

NEFaurora · Post by **NEFaurora** » Sun Oct 12, 2014 9:35 pm

Yes, An Amberola 75... I have an oak one of those.

Judging on the condition.(And assuming the Stylus in the reproducer is good and not worn)...You could pay anywhere from $300 to $500 for that machine. Really Super clean ones can go for even more. Make sure all three drawers are there when you open the door. Sometimes one or two or all of the drawers are missing. There should be three drawers behind the door. All three drawers will hold up to 72 Edison cylinder records. It was produced for ten years from 1915 to 1925....but sold until Edison closed in 1929.

A must get for any Edison collector!

)

Tony K.

welshfield · Post by **welshfield** » Mon Oct 13, 2014 9:55 am

Thank you all for your comments and advice.

Sigh.....

I really really do not need any more machines but this is so close to me.
There also is a Home, 2-minute only with endgate, no horn is visible; and 68 cylinders in one box.
I already have a Home, 2/4 minute, and all the cylinders I can play.

But then there is the "bug" with which I seem to be infected that tells me I need more.
Maybe if the price is right I'll buy the Home and resell it on this forum if I can be advised of an honest markup I can ask for it.

If it is raining I will not go, probably, since I only have an open pickup truck for hauling.
Thanks for listening.

John

Phonofreak · Post by **Phonofreak** » Mon Oct 13, 2014 1:42 pm

John, I'm playing the Devil's Advocate

If it is cheap, go for it. You can always sell the lesser machines. Check all the pointers the other members have posted. Good luck

Harvey Kravitz

Andersun · Post by **Andersun** » Mon Oct 13, 2014 1:48 pm

Check for cylinders and look at all titles. Might be a cylinder worth 100.00 alone in there!
You will get it for $250......

Let us know what happens!

Help identifying an Edison internal horn machine

Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine

Re: Help identifying an Edison internal horn machine