I am not as well versed on which horn
would be exactly correct for each machine, as
some other collectors are here.
It has been said that if your machine's cabinet
is drilled in the back for the cygnet horn crane
bracket, then that would be a basis to go with
for putting it back that way. I personally
think (as others here have already said), that it's probably not the greatest idea to drill up
the back of a previously undrilled machine cabinet.
Here's my suggestion:
An Edison Home machine I feel looks mighty
good with its straight Edison black 11 panel
morning glory horn. It will sound superb too.
That will not cost nearly as much as the cygnet
horn. At shows such as Union, there are always
plenty of very nice 11 panel straight Edison
morning glory horns for around $100.
A reproduction or original crane with foot,
foot bracket, and top bracket can also be
purchased at a very reasonable price.
That's just my way of looking at it.
Chuck
Cygnet horn on an Edison Home
- Chuck
- Victor III
- Posts: 892
- Joined: Fri Mar 25, 2011 11:28 pm
- Personal Text: Richards Laboratories http://www.richardslaboratories.com producing high quality cylinder blanks
- Contact:
Re: Cygnet horn on an Edison Home
"Sustained success depends on searching
for, and gaining, fundamental understanding"
-Bell System Credo
for, and gaining, fundamental understanding"
-Bell System Credo
-
ambrola
- Victor IV
- Posts: 1502
- Joined: Sat Dec 29, 2012 11:20 am
- Personal Text: Be Careful What You Say, You Can't T ake It Back!
- Contact:
Re: Cygnet horn on an Edison Home
Nothing wrong with a straight horn. This model D came this way. I prefer a cygnet horn because of the room, but I too would not drill a machine that did not come this way.
-
Jerry B.
- Victor Monarch Special
- Posts: 8741
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Cygnet horn on an Edison Home
If you buy a reproduction horn you might consider having it wood rained rather than painting it black. The horn in my photo is an original horn but when it came into my possession it was house painted in gold. Black Cygnets are nice but oak or mahogany was an option that was seldom purchased. I think it makes my horn a touch more interesting. Jerry
-
ambrola
- Victor IV
- Posts: 1502
- Joined: Sat Dec 29, 2012 11:20 am
- Personal Text: Be Careful What You Say, You Can't T ake It Back!
- Contact:
Re: Cygnet horn on an Edison Home
I agree. Here is a repro I painted years ago.
-
Jerry B.
- Victor Monarch Special
- Posts: 8741
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Cygnet horn on an Edison Home
Here's a few photos of a Standard D with a good quality reproduction Cygnet. Jerry
- VintageTechnologies
- Victor IV
- Posts: 1651
- Joined: Thu Jul 14, 2011 12:09 pm
Re: Cygnet horn on an Edison Home
That is a very subjective judgement, but I have always thought they sounded slightly better than the Tea Tray Co. MG horns, perhaps due to the taper of the long slender neck. It would be interesting to compare the cross sections of such horns.sq4wonder wrote:Anyone have an opinion if Cygnet horns have better sound than a morning glory horn?
-
ambrola
- Victor IV
- Posts: 1502
- Joined: Sat Dec 29, 2012 11:20 am
- Personal Text: Be Careful What You Say, You Can't T ake It Back!
- Contact:
Re: Cygnet horn on an Edison Home
To give you an idea between original versus reproduction. And it will cost more than 100.00 for a crane and back mount. The crane will cost that much.
ORIGINAL REPRODUCTION
ORIGINAL REPRODUCTION