Spring Motor

Discussions on Talking Machines & Accessories
User avatar
phonogfp
Victor Monarch Special
Posts: 8165
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Spring Motor

Post by phonogfp »

Gramtastic wrote:George, photo now attached.
Is this not a Spring Motor then ??
No, not a Spring Motor. The patent date is Nov. 17, 1903.

George P.

Gramtastic
Victor III
Posts: 575
Joined: Fri Jan 06, 2012 5:22 am

Re: Spring Motor

Post by Gramtastic »

That explains a lot ! Many thanks for the info.

User avatar
phonogfp
Victor Monarch Special
Posts: 8165
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Spring Motor

Post by phonogfp »

You're very welcome. :)

This explains the holes drilled in the corners of the bedplate - - Spring Motors didn't have them, but Triumphs did. The on/off lever is the later style, so I'll change my diagnosis to this being a complete Model A Triumph mechanism lifted out of its original cabinet and dropped into the earlier cabinet of a Spring Motor or Concert.

I should have asked for a photo of the data plate FIRST! :)

The serial number may also explain the machine's present state. Triumphs between roughly 45,000 and 50,000 were equipped with Model A mechanisms mounted in the later raised-panel cabinet we associate with the Model B/C/D/E/F. A collector in days gone by may have thought he had a mismatch of mechanism and cabinet, so he may put the mechanism in the earlier Spring Motor/Concert cabinet.

George P.

Post Reply