victor 16 early and late?

Discussions on Talking Machines & Accessories
edisonsclone
Victor O
Posts: 54
Joined: Sun Jan 15, 2012 6:19 pm

Re: victor 16 early and late?

Post by edisonsclone »

No table
Attachments
IMG_20150311_172045783.jpg

edisonsclone
Victor O
Posts: 54
Joined: Sun Jan 15, 2012 6:19 pm

Re: victor 16 early and late?

Post by edisonsclone »

Top and table
Attachments
IMG_20150311_171955393.jpg

User avatar
De Soto Frank
Victor V
Posts: 2687
Joined: Wed Dec 01, 2010 1:27 pm
Location: Northeast Pennsylvania

Re: victor 16 early and late?

Post by De Soto Frank »

Thanks for posting the photos... this is an interesting combination of features:

> Improved Concert sound-box (with triangular hole)

> Crank towards front

> Speed control towards back

> First style auto-stop

> "Old-style thin taper-tube" where the reproducer rests on top part of tube ( rather than along-side, on a little tab ).


Just going off the top of my head, a suffix E should be around 1912...


I would have been expecting an Exhibition sound-box, crank in the middle, and speed control up-front...


Is the cabinet label still intact ? What is the date ?


:coffee:
De Soto Frank

edisonsclone
Victor O
Posts: 54
Joined: Sun Jan 15, 2012 6:19 pm

Re: victor 16 early and late?

Post by edisonsclone »

Unfortunately, the paper tag has very little left of it.

User avatar
De Soto Frank
Victor V
Posts: 2687
Joined: Wed Dec 01, 2010 1:27 pm
Location: Northeast Pennsylvania

Re: victor 16 early and late?

Post by De Soto Frank »

Here is the cabinet label from my 1909 C/B XVI. It is located inside, on one of the sides. Picture taken through the trap-door on the back of the machine.


Label is officially dated august 1, 1909, in the lower-left, but below that, outside the border lining, is what appears to me to be a date-code, perhaps for the label design: 7-18-9.



I am assuming that the license label for your -E machine is on the bottom of the cabinet ?
Attachments
IMG_2505 VV XVI Cabinet Label August 1 1909.JPG
De Soto Frank

edisonsclone
Victor O
Posts: 54
Joined: Sun Jan 15, 2012 6:19 pm

Re: victor 16 early and late?

Post by edisonsclone »

Nothing on the bottom of the machine, I only have a bit left of the center of the tag ,located on the back. My L door and my early 14( with the queen Ann legs), have the trap door, and have tags behind the door. This 16, has a panel on the back, and I have taken the motor out for some adjustments, and no sign of tags inside exist.

Post Reply